Sony VTC5 2 Pack
The Sony VTC5 has High quality efficient, rechargeable high drain battery with an incredible 30 amp limit for your mechanical mods! Sony provides continuous output with no pulsing, just stops when its drained. The Sony VTC5 is a fantastic battery simply a must have for any sub-ohm or micro-coil devices.
NOTE: Do not carry or store batteries together with metallic, objects in your pockets, purse, or anywhere else where they may become exposed metals.
IMPORTANT: Use caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in or on a fire-proof surface. Never leave charging batteries unattended. We will not be held responsible for damage if there is any modification of the batteries/chargers in any form. We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers.
vapingcloud9.com accepts no responsibility or liability for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. You are responsible to have a basic Knowledge of the batteries you are using and how to care for them properly.
•Nominal Capacity: 2600mAh
•Rated Capacity: 2500mAh
•Max Discharge Current: 30A
•Nominal Voltage: 3.6V
•Full charge Voltage: 4.2V
•Operating Temperature (cell surface): Charge 0 ~ 50℃ , Discharge -20 ~ 75℃
•Diameter 18.35mm max
•Length 65.20mm max
•Weight : 44 g Average
•Positive terminal: Flat top
•Battery Type /shape: 18650 Cylindrical
•1 x VTC5 Batteries
Note: Safe chemistry LiMN means reduced risk of venting with flame or explosion. Due to the safety inherent in IMR safe chemistry batteries there is no protection circuitry added or built in. This provides a slightly shorter battery length to enable a good fit in most mods. To ensure longevity, it is not recommended to allow the battery to discharge below 2.5V.
Please note that due to their inherent safety, IMR cells don't have a protection circuit built in. They should never be discharged below 2.5 volts or cycle life/performance will be reduced. Maximum charge voltage is 4.25 volts